Yarn sensor (presence of one yarn): MOS-E

MAIN FUNCTION: To control the presence of yarns while linear, to-and-from or ballooning motion.
(When linear motion, there should be a sufficient vibration of the yarn).

When the yarn breaks or stops, the sensor will indicate a default situation and give the information to the machine or to the operator by the means of a LED. It can activate a yarn cutter or stop the position giving a 15V signal to an automate.

PRINCIPLE: The MOS-E probe will check the tension variations produced by motion of the yarn inside the IR light beam. The MOS-E is insensitive to external light interference. Minimum yarn size detected : 0,02mm.

ELECTRICAL PROTECTION: The MOS-E is protected against reversed polarity and high level overload on output. It shows a high level of EMC, electromagnetic compatibility : >4 kV.

Find out the technical datasheet(format PDF)...