Yarn sensor (presence of one yarn): MCD-F

When the yarn (or sleeve) breaks, the MCD-F will inform the user (flashing LED) that a position is defective. It can also stop the position giving a LOH information to an automate.

Any kind of material that can be electrified can be checked by the MCD-F.

PRINCIPLE: The MCD-F probe will check the tension variations produced by the electrical charges into the yarn in motion. The MCD-F is insensitive to machine vibrations.

ELECTRICAL PROTECTION: The MCD-F is protected against reversed polarity and high level overload on output. It shows a very high level of EMC, electromagnetic compatibility :> 4 kV.

PRINCIPLE: MCL1 probe will check the tension variations produced by the electrical charges into the yarn in motion. MCL1 is insensitive to dust and vibrations.

ELECTRICAL PROTECTION: MCL1 is protected against reversed polarity and high level overload on output.
It shows a very high level of EMC, electromagnetic compatibility:>4 kV.

Find out the technical datasheet(format PDF)...