Yarn cutter: CA9-T

The CA9-T series are yarn cutters (type of Commissioning: screw-on) devoted to textile machines. They can cut up to 1 100 dtex yarns.

FUNCTIONS: When operating on yarn machines, the breaking of one (or more) yarn has to be detected immediately and automatically. Yarn sensors play this part. To avoid a "wild" rewinding which could be cause of perturbations on neighbouring sites, even of breaking of the machine, it is recommended to mount CA9-T onto the machines. First they cut off the broken yarns, second they grip them.

On winding machines, the yarn has to be cut when the bobbin is full. CA9-T series have to be manually reloaded.

PRINCIPLE: The yarn passes through the groove of the yarn cutter and is led by two guides. When occurring, a hammer (knife) striking against an anvil cuts the yarn. The electromagnet, activated by the yarn sensor, attracts the framework and releases the blade. Striking strength is supplied by a compressed spring triggered by the electromagnet. A pincer holds the yarn.

ELECTRICAL PROTECTION: The CA9-T series are protected against reversed polarities and is dust resistant. The materials applied on this of equipment make it very resistible to aggressive working environment.

Find out the technical datasheet(format PDF)...